Whether you want to extend your residential property, renovate your driveway or build new office premises, regardless of the size of the job, every construction project requires you to invest a lot of time and money. Therefore, it is essential to plan every detail meticulously and ensure that your blueprints and estimates match perfectly with the actual construction. Any blips or arbitrary execution can lead to delays, inconvenience, and increased cost, which eventually deteriorates the quality of the construction.
The final quality of a construction project depends on a plethora of factors, but the most crucial one is “raw materials.” The quality of raw materials you use significantly affects the quality of your construction.
One of the most important raw materials in the construction industry is Concrete Mix. Traditional and ready mix concrete are both widely used across the construction industry. Your concrete laying process will significantly affect the speed of the construction process and the durability of the structure.
Keeping all the factors mentioned above in mind, we can conclude that every construction project manager or homeowner must get the right quality and quantity of concrete for their project. Our Concrete laying experts at RMS Concrete will take care of the quality and deliver the top-notch quality of concrete in London, Kent & Essex. As far as the quantity is considered, we have compiled a few steps in this article that will help you determine the exact amount of concrete that your project will require.
To avoid running out of concrete in the middle of the laying progress or ending up with heaps of extra concrete, you need to calculate your concrete requirements in advance. Read on to know-how.
Steps For Calculating Concrete Requirements For Your Project
Step 1: Decide where the concrete will be poured
Before measuring the area where you want to pour your concrete, it is essential to determine what type of space you are looking to fill with ready-mix concrete. Our formula applies to the three most common types of concrete layings, i.e., slab, footing, and column.
Step 2: Measure all the dimensions of the site
Once you have come to an agreement about where you want to pour your concrete mix, the next step is to take the measurements. The concrete calculating formula will help you figure out your requirements based on measurements made in meters.
It is crucial to measure your concrete laying site accurately. Double-check your details before using them in the calculating formula or communicating those measurements with your concrete provider. Unreliable measurement results can give you the wrong idea and hinder the efficiency of your mixed concrete laying process in the future.
Step 3: Enter your dimensions in the calculating formula
Once you have determined the concrete laying site and precisely measured the dimensions of that site, it is time to enter that data in the concrete calculating formula. The calculation formula is mentioned below.
For precise calculations, follow the formula mentioned below –
Measure the thickness of the mixed concrete
Measure the length and width of the concrete laying area
Calculate the product of the length and width, i.e., the square footage.
Convert the thickness into feet from inches
Multiply the thickness of concrete with the square footage and determine to cubic feet
Get the cubic yards by multiplying the cubic footage with .037
Below, we have calculated the concrete requirements of a ten by ten concrete patio. It will help you understand the formula in a better way.
10 x 10 = 100 square feet
4 ÷ 12 = .33
100 multiplied by 33 = 33 cubic feet
Now multiply 33 x .037 = 1.22 cubic yards
This formula is used for calculating the volume of concrete required, which is later turned into cubic yards measurement. For mixed concrete, the volume is always calculated by using the formula length x width x thickness.
Suppose you do not want to calculate the requirements manually and so, in that case, you can also use pre-prepared calculators available online or get in touch with the concrete providers and inform them about your dimensions. They will help you ascertain the precise requirements.
Step 4 – Receive a cost estimate based on the concrete quantity required
Once you have your final ready mix concrete requirements, the next and final step is to work out the cost of your projects. For this step, all you have to do is contact the team at RMS Concrete and inform them about the volume of concrete you require. Our experts will work out the best quote for your project and help you with all your concrete mix queries.