Time management is a crucial part of any construction project. Concrete pumping service moves the concrete mix quicker than any manual method; this will save a lot of time and effort. It is used when a large amount of concrete is required and other means of transportation are not feasible. It transports the freshly mixed concrete to the most challenging location. That is best to choose concrete pumping if your project demands large concrete.
Pumping is a reliable, economical, and efficient method of placing concrete and sometimes the only option of getting concrete at specific locations.
What is a Concrete Pump?
Have you seen a truck with a rotating drum? You might have seen it at the construction site. It can pour the concrete close to the job site and reduce the hauling time. But it cannot reach all the required places. During such times, concrete pumping is the best solution. It sucks the material out of the hopper, through the valve system, and into the area you direct.
There are two types of concrete pumps:
Much like a crane, rise through the air with articulating sections and transport the concrete to needed locations. It has a remote-controlled robotic boom attached to a truck. It remains in one place for the entire unloading time.
Also Known as the ground pump, is a trailer-mounted concrete pump that uses a series of steel hoses to place concrete wherever it is needed. It pulls the concrete with a hose at ground level, which you can snake around corners where a truck mixer cannot reach.
Both pumps are helpful in construction work, using twin hydraulic cylinder pumps. One piston will draw the liquid concrete from a hopper, and the other will push the concrete into the discharge pipes. The valve mechanism allows the cylinder to alternate between pulling concrete and moving it by pumping a higher volume of concrete and saving time.
However, concrete must be suitable for pumping, having enough water for the mix to move smoothly through the pump and hoses. Otherwise, it will clog the pump lines.
The Function of Concrete Pump
A skilled, certified, and professional pump operator controls the concrete pump. The operator takes care of the pump’s operation, position, and output by directing the hose. The operator is also responsible for driving the pump to the construction site, setting it up, and cleaning it after use. The duty also involves maintenance of the pump and repair of the parts when necessary.
Application of Concrete Pump
Concrete pumping is used in a wide variety of construction applications. Due to its high volume of concrete, it has found great utility in infrastructure projects such as big industrial projects, high-rise buildings, airports, flyovers, metro rail, and bridges, as these projects require a significant quantity of concrete in a tight schedule.
The ready-mix concrete is gaining popularity worldwide, generating an increased demand for pumping. Placing concrete pumps in inaccessible areas has demanded the need for pumps in construction. Pumps enable concrete to pour directly via boom rather than be transferred in manually. It is faster and allows a continuous flow of concrete to the site.
Reasons to Choose Concrete Pump
- It can reach where regular truck mixers cannot go.
- It saves money and time.
- It will help if you do not have sufficient workers to push the wheelbarrows.
- It can perform well on uneven and rocky ground.
- Useful if your site is inside the building, at height, or in a basement.
- It can function even during bad weather.
- Due to its time-saving capability, it can cover multiple locations daily.
- No wastage of concrete.
- Easy and faster transportation.
Benefits of using the Concrete Pump
It can pump a more considerable volume of concrete as quickly as possible, around 30 to 100 cubic meters of concrete per hour. The speed of the pump also ensures the quality of concrete pouring. An operator will arrange the set-up very fast and can finish the job within an hour.
Concrete pumps require fewer human resources to distribute concrete to the site. Instead of relying on multiple workers, the operator will accurately place the pump using the boom and finish the task. It will give a continuous flow of concrete. Hence, no time will be wasted.
It can reach the most difficult places or places you might have considered impossible for a hunk of concrete to reach via machine. The broader reach of concrete pumping makes it a favorite choice in the construction industry.
Many contractors prefer pumping over crane and bucket placement because it is fast and budget-friendly. They also use extensive line pumps to enhance productivity and improve the quality of construction. Irrespective of the project’s size, the concrete pump’s handy nature will help finish the project within the timeline and budget.
Concrete Pumping Services in London, Kent, and Essex
RMS Concrete is a top-quality ready-mix concrete supplier in London, Kent, and Essex. Our grades and strength of concrete are economical. With an understanding of today’s complex infrastructure, we also offer on-site concrete mix, line pumping, and boom concrete pumping services in the London area. Our BSI 9001 certified specialists are experienced in delivering quality services and providing the perfect concrete for your project.
Contact us today at +447894239114 or online for more information.